Junction box T 60, plug-in seal

Parent Item no. cxmOID177792
  • Protection rating IP 66
  • Halogen-free; without chlorine, fluorine and bromine
  • Verband der Elektrotechnik, Elektronik, Informationstechnik e.V., Germany
  • Communautés Européennes, EC declaration of conformity according to EC directives
  • IK Code 07
  • Flame resistant 650 °C
  • M25 entry
  • KEMA-KEUR, Netherlands
  • Nominal cross-section 6 mm²
  • 7 cable entries
  • Nail device
  • Nominal voltage 500 V
  • UV-resistant

All the T series junction boxes are UV-resistant. They are made of a thermoplastic polypropylene plastic with plug-in seals made of ethylene vinyl acetate (EVA). This plastic is soft, which means that it is malleable. This allows installation of cables through the 7 x M25 seals, or the seals can be cut with a knife at the pre-marked points, in order to create an insertion opening for cables or pipes. Alternatively, instead of seals, cable glands can be inserted through the openings and be countered internally with a locknut.
The junction boxes can be mounted on mounting plates in the openings on the floor using steel bolts 3.5 x 9.5.
Clear internal dimensions: 100x100x48 mm
Cover with labelling panel and lead-sealed.

Clear internal dimensions: 100x100x48 mm

Protection rating IP66; Protection rating IK code IK07.

All types

All types

Types Colour Version Entries Clear
Item no. Quantity SSU
T 60 Light grey; RAL 7035 Standard 7 x M25 100x100x48 mm 2007061
5 piece
Junction box T 60, plug-in seal
Junction box T 60, plug-in seal

Junction box T 60, plug-in seal

Item no. 2007061

Data sheet, 0.20MB, pdf

Technical data

Expandable yes
No. of entries 7
Type of entry Cable
Type of entry Plug-in seal
Type of housing penetration Cuttable stepped membrane
Version Standard
Appendix document 634451 (tserie.pdf); 634124 (harte_typen.pdf)
Measured insulation voltage Vi 500 V
Equipment Without
Cover Not transparent
Cover fastening Screwed
Entries 7 x M25
Entry from rear yes
Explosion-tested version no
Flame resistant Flame resistant to VDE 0471/DIN 695 Part 2-1, test temperature 650 °C
Shape Square
Function maintenance (ETIM) Without
For Ex zone Without
For Ex zone gas Without
For Ex zone dust Without
Fibre-glass reinforced no
Halogen-free yes
With screening no
with lid With four lid quick-release locks
With cover yes
Installation type Wall/ceiling mounting
Mounting type Wall/ceiling mounting
Nominal cross section 6 mm²
Nominal voltage 500 V
Protection rating IP66
Protection rating IP66
Protection rating IK code IK07.
Sealable yes
max. permitted ambient temperature -5 - 60 °C
Transparent lid no
Material description Polypropylene
Weatherproof no


Length 114 mm
Width 114 mm
Height 57 mm
Clear internal dimensions 100x100x48 mm
3D data
Invitation to tender text

Invitation to tender text

T 60 / 2007061

Data sheet

T 60 / 2007061, 0.20MB, pdf

Catalogues & Flyers

OBO Aquasit cold casting compound with IP68 protection rating, 0.27MB, pdf
T series junction boxes, 5.42MB, pdf
Overview of junction boxes, 3.72MB, pdf

Declarations of conformity