Junction box T 25, plug-in seal

Parent Item no. cxmOID177790
  • Protection rating IP 65
  • Halogen-free; without chlorine, fluorine and bromine
  • Verband der Elektrotechnik, Elektronik, Informationstechnik e.V., Germany
  • Communautés Européennes, EC declaration of conformity according to EC directives
  • IK Code 07
  • Flame resistant 650 °C
  • M25 entry
  • KEMA-KEUR, Netherlands
  • Nominal cross-section 2.5 mm²
  • 4 cable entries
  • Nail device
  • Nominal voltage 500 V
  • UV-resistant

All the T series junction boxes are UV-resistant. They are made of a thermoplastic polypropylene plastic with plug-in seals made of ethylene vinyl acetate (EVA). This plastic is soft, which means that it is malleable. This allows installation of cables either directly through the 4 x M25 seals, or the seals can be cut with a knife at the pre-marked points, in order to create an insertion opening for cables or pipes. In addition, cable glands can be pushed through the openings instead of the seals and locked with a locknut from the inside.
The cable junction boxes can be screwed onto an M6 thread or be mounted on mounting plates in the openings on the floor using steel screws 3.5 x 9.5.
Clear internal dimensions: Ø63x45 mm
Lid with labelling panel.

Clear internal dimensions: Ø63x45 mm

Protection rating IP65; Protection rating IK code IK07.

All types

All types

Types Colour Version Entries Clear
internal
dimensions
Item no. Quantity SSU
T 25 Light grey; RAL 7035 Standard 4 x M25 Ø63x45 mm 2007029
5 piece
Junction box T 25, plug-in seal
Junction box T 25, plug-in seal

Junction box T 25, plug-in seal

Item no. 2007029

Data sheet, 0.17MB, pdf
Download

Technical data

Expandable yes
No. of entries 4
Type of entry Cable
Type of entry Plug-in seal
Type of housing penetration Cuttable stepped membrane
Version Standard
Appendix document 634451 (tserie.pdf); 634124 (harte_typen.pdf)
Measured insulation voltage Vi 500 V
Cover Not transparent
Cover fastening Locking
Entries 4 x M25
Entry from rear yes
Explosion-tested version no
Flame resistant Flame resistant to VDE 0471/DIN 695 Part 2-1, test temperature 650 °C
Shape Round
Function maintenance (ETIM) Without
For Ex zone Without
For Ex zone gas Without
For Ex zone dust Without
Fibre-glass reinforced no
Halogen-free yes
With screening no
with lid With locking lid
With cover yes
Installation type Wall/ceiling mounting
Mounting type Wall/ceiling mounting
Nominal cross section 2.5 mm²
Nominal voltage 500 V
Protection rating IP65
Protection rating IP65
Protection rating IK code IK07.
Sealable no
max. permitted ambient temperature -5 - 60 °C
Transparent lid no
Material description Polypropylene
Weatherproof no

Dimensions

Height 51 mm
Diameter 80 mm
Clear internal dimensions Ø63x45 mm
3D data
Invitation to tender text

Invitation to tender text

T 25 / 2007029
Download
Downloads

Data sheet

T 25 / 2007029, 0.17MB, pdf
Download

Catalogues & Flyers

T series junction boxes, 5.42MB, pdf
Download
OBO Aquasit cold casting compound with IP68 protection rating, 0.27MB, pdf
Download
Overview of junction boxes, 3.72MB, pdf
Download

Declarations of conformity